Basic Info.
After-sales Service
Warranty
Maximum Lifting Height
>40m
Maximum Lifting Weight
>16t
Product Description
Product DescriptioSMART HYDRAULICSOMPACT DESIGN
Larger flow ensures higher efficiency, like higher speed of wire rope reeling. Shunted mode of independently controlled combined
motions realizes higher stability, like simultaneous vibration-free luffing and hoisting.
ELECTRICAL CONTROL
Valves and other hydraulic components realize better inching motion performance. Load-sensing and constant-power techniques
optimize fuel efficiency. Simple harness and steady signal transmission. Real-time auto monitoring of operation conditions.
Efficient & Unique Hydraulic System
Triple gear pump, load feedback and constant power control are applied to provide strong lifting capacity and good micro-mobility.
Unique steering buffer design guarantees smooth braking operation.
Intelligent Electronic Control
Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network
control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can
achieve the monitoring of the overall working status in real time.
The Load Moment Limiter
Equipped with the comprehensive intelligent protection system is used with accuracy within 3%. The adoption of comprehensive logic
and interlock control system ensures more safe and reliable operation.
More Safe Devices
Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope.
Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.
Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc., to ensure stable and
reliable operation.
Product Paramenters
Capacity | Max. lifting capacity | 80t |
Dimensions | Overall length | 14100 mm |
Overall width | 2750 mm |
Overall height | 3850 mm |
Axles | 4 |
Axle distance-1,2 | 1520 mm |
Axle distance-2,3 | 4400 mm |
Axle distance-3,4 | 1350 mm |
Weight | Overall weight | 46000 kg |
Front axle load | 22000 Kg |
Rear axle load | 26000 kg |
Engine | Model | |
Rated power | 275 kW/2100 rpm |
Rated torque | 1550 N.m/1200 rpm |
Emission standard | Euro |
Traveling | Max. traveling speed | 80 km/h |
Min.turning radius | 12 m |
Min.turning radius of boom head | 15.6 m |
Drive train | 8 × 4 |
Min. ground clearance | 230 mm |
Approach angle | 20° |
Departure angle | 12° |
Max. gradeability | 37% |
Fuel consumption per 100km | ≤ 55 L |
Main Performance | Temperature range | - 30 ºC - +60 ºC |
Min.lifting radius | 3 m |
Tail swing radius of superstructure | 4.116m |
Boom section | 5 |
Boom shape | U-shaped |
Max. lifting moment-Base boom | 2560.2 kN·m |
Max. lifting moment-Full-extend boom | 1254.4 kN·m |
Max. lifting moment-Full-extend boom+jib | 414.9 kN·m |
Length-Base boom | 11.8 m |
Length-Full-extend boom | 45 m |
Length-Full-extend boom+jib | 61 m |
Outrigger span(Longitudinal/Transversal) | 6.1 × 7.6 m |
Jib offset | 0 ° 15 ° 30 ° |
Working Speed | Max. single rope lifting speed of main winch(no load) | 130 m/min |
Max. single rope lifting speed of auxiliary winch(no load) | 130 m/min |
Full extend/retract time of boom | 120 / 130 s |
Full raise/lower time of boom | 80 / 80 s |
Swing speed | 2.0 r/min |
Aircondition | HVAC in up cab | Cooling and Heating |
HVAC in low cab | Cooling and Heating |
What We Sell
Address:
Room 604, No. 245, Chaoyang Tingshi North Road, Shimen Street, Baiyun District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Transportation
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.